SG Wireless Products

IoT Solutions Provider

SGW101X BLE Module Series

Introduction

The SGW101X series of Bluetooth 5.0/Bluetooth Low Energy (BLE) modules, powered by Nordic’s nRF52840 Bluetooth® 5/BLE advanced multiprotocol System-on-Chip, provides a complete RF solution for use in IoT applications ranging from connected home, smart city infrastructure, industrial mesh networks, industrial smart light, to transport and logistics.

Featuring a small form factor of 10.2 x 15 x 2.1mm, the advanced SGW101X series of modules is designed to reduce the engineering efforts and development costs associated with adding Bluetooth 5 to any product, thereby accelerating its time to market. It also offers best-in-class security to address the inherent security challenges that are faced in IoT.


Features

Complete RF solution with integrated antenna.
Bluetooth 5 ready multi-protocol module:
2Mbps
Long Range
Advertising Extension support.
Wireless System-on-Chip: Nordic nRF52840:
32-bit ARM Cortex™-M4F CPU @64MHz
1MB Flash program memory
256kB RAM data memory.
Wide selection of MCU Peripherals:
Full-speed USB (12Mbps)
Four SPI Master/Slave (8Mbps)
Two 2-wire Master/Slave (I2C compatible)
Two UARTs (with CTS/RTS)
NFC Tag-A interface
20 channel CPU independent Programmable Peripheral Interconnect (PPI)
5x32 bit, 3x24bit Real Timer Counters (RTC)
12-bit/200K SPS ADC.
Support 128-bit AES HW encryption.
48 General Purpose I/O pins.
Supply voltage: 1.7–5.5V.
Low Energy Current consumption, 3V DCDC enabled:
Tx only, 0dBm: 4.8mA (typical)
Rx only@1Mbps: 4.6mA (typical)
System On mode, with full RAM retention: 2.35uA.
System Off mode, with full RAM retention: 1.86uA.
Operating Temperature: −40°C to 85°C.
BQB : DID D046088, QDID : 135014
FCC ID : 2AS9401
IC (Industrial Canada) ID: 25021-01
CE : certified
Mechanical Dimension: 10.2mm x 15.0mm x 2.1mm.

SGW1010 Module Block Diagram

SGW1011 Module Block Diagram

Applications

Typical Application - BLE sensors Tag

  • Connected home
  • Smart city infrastructure
  • Industrial mesh networks
  • Industrial smart lighting
  • Logistics and transportation

SGW1010 Evaluation kit

SGW1010 EVK

The SGW1010-EVK is a versatile single board evaluation kit for Bluetooth 5, Bluetooth mesh, NFC and 2.4 GHz proprietary applications on the SGW1010 BLE module.

It facilitates development exploiting all features of the SGW1010 BLE module. It includes an NFC antenna that quickly enables utilization of the NFC-A tag peripheral on the BLE module. All GPIOs are available via edge connectors and headers, and 4 buttons and 4 LEDs simplifies output and input from and to the BLE module.

Order Information

Part No Description
SGW1010 SGW1010 Bluetooth 5 module, Built-in antenna
SGW1011 SGW1011 Bluetooth 5 module, u.FL connector for external antenna
SGW1010–EVK SGW1010 Bluetooth 5 module Evaluation Kit

Downloads

Product Brief

Datasheet


Evaluation Kit User Manual


Library and Model


Markets

For over 40 years, we have worked in partnership with the world’s most demanding companies across an extensive range of markets.